Dual & Variable Speed Floor Buffers

Floor Buffer Features

Designed for a dual purpose, these floor machines are an economical and practical approach when looking for the most effective use of equipment. Scrub and strip floors at the lower speed while also having the ability to buff floors to a high luster at the higher speed with the flip of a switch or turn of a dial.

• All steel triple planetary gear system, permanently lubricated with a specially designed flex coupler to guard against possible motor damage when under load.

• Flexible dual triggers for left or right hand operation are non-conductive and have built-in safety lockouts to prevent accidental startup.

• The heavy-duty switch is set in a die cast aluminum switch box that won’t chip or rust.

• Reinforced cast aluminum apron housing for added strength and rigidity.

• Non-marring rubber bumper prevents furniture and wall damage.

• Equipped with a 50 Ft, 14/3 safety yellow power cord.

MTS-Dual Speed Floor Buffers

Operates at 190 RPM for scrubbing or stripping and 320 RPM for spray buffing or polishing. Just flip the toggle switch conveniently located on the switch box to change brush speed. UL and CSA listed.

SPECIFICATIONS

MTS-17E (17" - 379727)
Current  13 AMPS

MTS-20E (20" - 379735)
Current  13.5 AMPS

   Motor   1-1/2 HP, 120V 60 Cycle - 66 Frame Permanent Magnet, 
           DC Rectified for AC Operation
   Gears   3 Idler
   Wheels  5" Transport

MTSV - Variable Speed Floor Buffers

The speed of this floor machine can be adjusted from 160 RPM to 320 RPM by simply turning the dial located on the motor canopy. This enables the operator to select the exact speed required for the floor maintenance task at hand. UL listed.

SPECIFICATIONS

MTSV-17E (17" - 340022)
Current   13 AMPS

MTSV-20E (20" - 335444)
Current   13.5 AMPS

   Motor   1-1/2 HP, 120V 60 Cycle - 66 Frame Permanent Magnet, 
           DC Rectified for AC Operation
   Gears   3 Idler
   Wheels  5" Transport

Note: Most models are available in 100V, 230V - 50/60 Hz, 400 Cycle.