| 1"
High Speed/Ultra High Speed Burnishing floor pads
The Original Blended Natural Fiber Floor
Pad that gives a "wet-look" shine. Gorilla® floor pad is made
with a blend of natural fiber and polyester. This blend uses properties
of both fibers to create the most unique and respected floor pad in the
world. To clean it, just brush away dried wax with it's die cut center.
It will not glaze over.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Superspeed Rubberized floor pad
A totally synthetic, non-aggressive floor
pad designed for burnishing and polishing with a high speed or ultra
high speed floor machine. The rubberized coating creates friction needed
to repair softer finishes. The Superspeed Rubberized floor pad will
create a high gloss shine.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| Ultra
High Speed Burnishing/BUFFING Floor Pads
This is an ultra-high-speed (2000rpm and
up) burnishing & spray buffing floor pad of special design. So
special that it's patented. It is constructed of two one-half inch floor
pads bonded to a stabilizing inner strata. The inner strata stops the
elongation and resulting destruction of the pad due to centrifugal
force. 2001® pads outlast normal pads on ultra high speed floor
machines more than 3 to 1.
The 2001® line of pads include:
· 2001® GORILLA
· 2001® JAGUAR
· 2001® Aqua PLUS
· 2001® GORILLA LITE
· 2001® SUPERSPEED RUBBERIZED
· 2001® SOFT WHITE (For zinc-free finish)
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Red-Spray Buff floor pad
A light abrasive floor pad for spray buffing to a satin
gloss. The fibers are more open to help keep the pad from glazing over.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
 |
| 1"
Tan-Buff floor pad
A mildly abrasive dry buffing floor pad for slow speed
floor machines. The Tan-Buff pad will buff away light soil and level
scratches for a soft luster.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
White-Polish floor pad
A non- abrasive dry polishing floor pad for slow speed
floor machines. The White-Polish pad will level scratches for a high
luster.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Green -Scrub floor pad
A medium abrasive floor pad for wet scrubbing. This pad
will remove embedded soil and black marks found in heavy traffic areas
without stripping your finish to the tile.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Blue-Cleaner floor pad
A medium abrasive floor pad for spray cleaning. To clean
a lightly soiled floor, use this pad with a spray solution. This process
will remove a small amount of finish. Can be used to wet scrub.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Black-Strip floor pad
A very aggressive stripping pad. It is designed to be
used to wet strip a floor. High quality abrasive and materials make this
an efficient tool for complete floor finish removal.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Monster®-Spray Clean/Light Scrub floor pad
Monster floor pad is designed with natural abrasive
action to clean black marks and soil. The top layer of finish, with its
embedded dirt, is removed and the remaining finish is brought to a high
sheen. Monster's "clean and shine" characteristics make it a
valuable tool for bringing a worn floor finish back to life and reduce
the need for stripping.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1"
Brown-Strip
floor pad
An aggressive floor pad designed for dry
stripping floor finish. Its fibers, throughout the pad, are coated with
high quality abrasives for a fast, efficient job.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
| 1/2"
Razorback®-High Performance Stripping floor pad
The Razorback® pad is our most aggressive stripping
floor pad. It works extremely well in problem areas that need to be
stripped. The Razorback® is designed with an open weave construction
that enables it to hold more load without clogging in heavy build up
situations.
Available in 13", 15",
17", 19" and 21" sizes packed 5 per case. |
|
Superscreen
Discs
Superscreen discs are used primarily on
hardwood floors. The discs sand down the old finish so that new finish
can be applied. This is known as the "scour method" of
refinishing a floor and is most often used on gym floors. Superscreen
discs come in grits ranging from extremely coarse to extremely fine. All
our discs are manufactured with waterproof resins & silicon carbide
abrasive, assuring you of the finest quality discs you can buy.
All grits available in rectangle sizes
60 grit - Extremely Coarse
80 grit - Coarse
100 grit - Medium
120 grit - Fine
150 grit - Medium Fine
180 grit - Very Fine
220 grit - Extremely Fine
400 grit - Super Fine
|
 |
